Construção de um mini-cluster (12 computadores)

Com detalhes sobre o consumo de energia

http://www.mini-itx.com/projects/cluster/

"At present, the idle power consumption is about 140 Watts (for 12 nodes) with peaks estimated at around 200 Watts. The machine runs cool and quiet. The controlling node has 256 MB RAM , and an 160 GB ATA 133 IDE hard disk drive. The computational nodes have 256 MB RAM, each and boot from 340 MB IBM microdrives by means of compact flash to IDE adapters. The computational nodes mount /usr on the controlling node via NFS, for storage and to allow for a very simple configuration. No official benchmarks have been run, but for simple computational tasks the mini cluster appears to be faster than four 2.4 GHz pentium 4 mcahines used in parallel, at a fraction of the cost and power use.

Mini-ITX boards have very low power dissipation as compared to most motherboard/cpu combination in popular use today. This means that a Mini-ITX cluster with as many as 16 nodes won't need special air conditioning. Low power dissipation also means low power use, so you can use a single inexpensive UPS to provide clean AC power for the nodes.

In contrast, a 12-16 node cluster built with Intel or AMD processors will generate enough heat that you will likely need heavy duty air conditioning. Additionally, you will need adequate electrical power to deliver the 2-3 kilowatts peak load that your 12 node PC cluster will require. Plan on having higher than average utility bills if you use PC's..."

-- GregorioIvanoff - 27 Feb 2004
to top